NJ TOOL RENTAL
CALL TEXT

WE DROP IT OFF & PICK IT UP

Delivery fee based on location.

NJ TOOL RENTAL

$19.99/DAY

Any 3-Tool Combo OR 1 Specialty Tool

JOBSITE HEATER
PIPE PRESS TOOL
ANY 3 KIT TOOLS
CALL TEXT

917-722-8594 (CALL OR TEXT)

Specialty tool rental for plumbers, electricians, HVAC techs, mobile mechanics and contractors.

Serving New Jersey, New York, Pennsylvania and Connecticut.

ONE SPECIALTY TOOL — OR A 3-TOOL KIT

1 YOU CALL
OR TEXT
2 WE DROP
IT OFF
3 WE PICK
IT UP

TOOLS WE RENT

SPECIALTY $19.99/day for that one tool.
KIT Mix any 3 kit tools for $19.99/day.

Text us the tool and your job site address. We confirm it and quote delivery before anything moves.

No matching tools shown. Try another search.

Concrete, Masonry & Tile42 tools
  • Breaker hammer (jackhammer), 60-70 lb Specialty Breaks up slabs, sidewalks, footings and asphalt. Text
  • Demolition hammer, 35-41 lb Specialty Heavy chipping and breaking in concrete and masonry, no drilling. Text
  • Demolition hammer, 22-27 lb Specialty Chips out tile, mortar and concrete, including on walls. Text
  • Chipping hammer, 12-16 lb Specialty Chisels out tile, mortar beds and small concrete patches. Text
  • Rotary hammer, SDS-Max (1-7/8 to 2 in.) Specialty Large anchor and core-bit holes in concrete, plus chipping. Text
  • Rotary hammer, SDS-Max (1-9/16 to 1-3/4 in.) Specialty Big holes in concrete, then switches to chipping mode. Text
  • Rotary hammer, compact SDS-Plus (5/8 in.) Kit Light, one-handed anchor holes in concrete and block. Text
  • Rotary hammer, SDS-Plus (1 to 1-1/4 in.) Kit Anchor holes in concrete and block far faster than a hammer drill. Text
  • Diamond core drill (up to 6-3/8 in.) Specialty Clean round holes through block, brick and slab for pipe and conduit. Text
  • Concrete vibrator, full-size Specialty Consolidates footings, walls and slabs so concrete fills in around rebar. Text
  • Concrete vibrator, pencil (small pours) Kit Works air voids out of small pours, post holes and forms. Text
  • Concrete power screed Specialty Strikes off and levels freshly poured slabs. Text
  • Plate compactor Specialty Compacts gravel and soil under pavers, slabs and walkways. Text
  • Rammer (jumping jack) compactor Specialty Compacts soil in trenches and tight spots a plate can't reach. Text
  • Concrete cut-off saw, 12 in. Specialty Deep, straight cuts in concrete, block, pavers and pipe. Text
  • Concrete cut-off saw, 9 in. Specialty Cuts concrete, block, pavers and rebar. Text
  • Concrete mixer Specialty Mixes concrete and mortar on site, batch by batch. Text
  • Mixing drill (thinset, mud, paint) Kit Mixes thinset, grout, mortar, drywall mud and paint. Text
  • Wet tile saw, 10 in. Specialty Cuts tile, porcelain and stone wet for clean edges and less dust. Text
  • Handheld tile & stone cutter, 4-3/8 in. Kit Wet or dry cuts in tile and stone, including notches in installed tile. Text
  • Hammer drill Kit Drills wood and metal, and adds hammering for brick, block and light concrete. Text
  • Tuckpoint & masonry cutting grinder (with dust shroud) Kit Grinds out mortar joints and cuts masonry with dust collection. Text
  • Concrete surface grinder (with dust shroud) Specialty Grinds high spots, coatings and thinset off concrete. Text
  • Large angle grinder, 7-9 in. Kit Heavy cutting and grinding in steel, concrete and masonry. Text
  • Duplex nailer (forms & scaffolding) Specialty Drives double-head nails for concrete forms and temporary bracing. Text
  • Concrete nailer Specialty Fastens track, furring and plates to concrete and steel. Text
  • Powder-actuated fastening tool Specialty Shoots fasteners into concrete and steel for track and bottom plates. Text
  • Pressurized water tank (for wet cutting) Specialty Feeds water to wet saws, core drills and grinders to keep dust down. Text
  • Vacuum lifter Kit Lifts and sets pavers, glass and stone slabs. Text
  • Rotary laser level (with detector) Specialty Sets grade and level across a site or a large slab. Text
  • Laser square Kit Projects square lines for tile and floor layout. Text
  • Builder's level (with tripod & rod) Kit Checks grade and elevation across a site. Text
  • Rebar tie pliers Kit Twists and cuts tie wire on rebar. Text
  • Hand sledge (drilling hammer) Kit Drives chisels, stakes and pins. Text
  • Brick hammer Kit Splits and trims brick and block. Text
  • Concrete finishing trowel & float Kit Floats and finishes fresh concrete by hand. Text
  • Brick, pointing & margin trowels Kit Spreads and tools mortar for brick and block. Text
  • Concrete groover / edger Kit Cuts control joints and rounds slab edges. Text
  • Hand tamper Kit Compacts soil and gravel in small areas. Text
  • Wheelbarrow / dump cart Kit Hauls soil, gravel, mulch and debris. Text
  • HEPA dust extractor Specialty Catches silica dust at the tool while you drill, grind or cut. Text
  • Mortar hoe Kit Mixes mortar and concrete in a tub or wheelbarrow. Text
Demolition14 tools
  • Breaker hammer (jackhammer), 60-70 lb Specialty Breaks up slabs, sidewalks, footings and asphalt. Text
  • Demolition hammer, 35-41 lb Specialty Heavy chipping and breaking in concrete and masonry, no drilling. Text
  • Demolition hammer, 22-27 lb Specialty Chips out tile, mortar and concrete, including on walls. Text
  • Chipping hammer, 12-16 lb Specialty Chisels out tile, mortar beds and small concrete patches. Text
  • Rotary hammer, SDS-Max (1-7/8 to 2 in.) Specialty Large anchor and core-bit holes in concrete, plus chipping. Text
  • Rotary hammer, SDS-Max (1-9/16 to 1-3/4 in.) Specialty Big holes in concrete, then switches to chipping mode. Text
  • Concrete cut-off saw, 12 in. Specialty Deep, straight cuts in concrete, block, pavers and pipe. Text
  • Concrete cut-off saw, 9 in. Specialty Cuts concrete, block, pavers and rebar. Text
  • Reciprocating saw Kit Rough, fast demo cuts through framing, nails and pipe. Text
  • Hand sledge (drilling hammer) Kit Drives chisels, stakes and pins. Text
  • Wrecking bar Kit Pries apart framing, forms and demo debris. Text
  • Flat pry bar Kit Pries trim, molding and siding with minimal damage. Text
  • Nail puller / claw bar Kit Digs out and pulls embedded nails. Text
  • Floor / ice scraper Kit Scrapes up tile, flooring, roofing and ice. Text
Carpentry, Roofing & Siding66 tools
  • Benchtop drill press Kit Straight, repeatable holes in wood and metal. Text
  • Stud & joist drill Specialty Bores big holes through studs and joists for pipe, conduit and cable. Text
  • Impact driver Kit Drives long screws and lag bolts without stalling. Text
  • Drill/driver Kit Drills holes and drives screws in wood, plastic and metal. Text
  • Track saw, 6-1/2 in. Specialty Straight, splinter-free cuts in plywood, doors and sheet goods. Text
  • Worm-drive circular saw, 7-1/4 in. Kit High-torque saw for framing, beams and long rip cuts. Text
  • Compact circular saw, 4-1/2 to 5-3/8 in. Kit One-handed cuts in plywood, paneling, trim and flooring. Text
  • Circular saw, 6-1/2 in. Kit Light, fast cuts in plywood, studs and sheet goods. Text
  • Circular saw, 7-1/4 in. Kit Full-size saw for framing, decking and sheet goods. Text
  • Benchtop band saw Kit Curves and resaw cuts in wood on the bench. Text
  • Scroll saw Specialty Tight, detailed curves in thin wood, plastic and soft metal. Text
  • Sliding miter saw, 7-1/4 in. Kit Portable crosscuts and miters for trim and small stock. Text
  • Sliding miter saw, 12 in. Specialty Wide crosscuts, miters and bevels in big trim, decking and lumber. Text
  • Miter saw, 12 in. Kit Crosscuts and miters in framing lumber and large trim. Text
  • Miter saw, 10 in. Kit Accurate crosscuts and miters for trim and molding. Text
  • Jobsite table saw, 10 in. Specialty Rips plywood, lumber and sheet goods on site. Text
  • Jobsite table saw, 8-1/4 in. Specialty Compact table saw for rip cuts in trim, flooring and plywood. Text
  • Jigsaw Kit Cuts curves, notches and openings in wood, laminate and sheet metal. Text
  • Oscillating multi-tool Kit Plunge cuts, flush trims and scraping where nothing else fits. Text
  • Fiber cement shear Kit Cuts fiber cement siding with very little dust. Text
  • Metal shear, 18-20 ga Kit Clean cuts in sheet metal and light-gauge steel, with no sparks. Text
  • Benchtop belt sander Kit Shapes and smooths wood and metal parts on the bench. Text
  • Belt sander Kit Fast stock removal on doors, decks and rough lumber. Text
  • Orbital floor sander Specialty Sands hardwood floors smooth without gouging. Text
  • Palm sander, 1/4 sheet Kit Fine finish sanding on trim, cabinets and furniture. Text
  • Random-orbit sander, 5-6 in. Kit Smooth, swirl-free sanding on wood, paint and body filler. Text
  • Thickness planer, 12-1/2 to 13 in. Specialty Planes rough lumber to an even thickness. Text
  • Hand planer, 3-1/4 in. Kit Trims doors, scribes and planes edges by hand. Text
  • Compact / trim router Kit Edge profiles, laminate trimming and hinge mortises. Text
  • Router (fixed or plunge) Kit Dadoes, profiles, mortises and template work. Text
  • Biscuit (plate) joiner Kit Cuts slots for biscuits to line up and join panels and frames. Text
  • Hot glue gun Kit Quick bonds for trim, crafts and light repairs. Text
  • Powered caulk & adhesive gun Kit Steady beads of caulk, sealant and construction adhesive. Text
  • Duplex nailer (forms & scaffolding) Specialty Drives double-head nails for concrete forms and temporary bracing. Text
  • Metal connector (joist hanger) nailer Kit Drives nails through joist hangers, straps and ties. Text
  • Framing nailer Specialty Drives full-size framing nails for walls, floors and roofs. Text
  • Roofing nailer Specialty Drives coil roofing nails at a steady depth. Text
  • Siding & fencing coil nailer Kit Coil nails for siding, fencing and sheathing. Text
  • Hardwood flooring nailer / stapler Kit Blind-nails tongue-and-groove hardwood flooring. Text
  • Finish nailer, 15 ga (angled) Specialty Door casing, baseboard and heavy trim. Text
  • Finish nailer, 16 ga Specialty Baseboard, casing and crown molding. Text
  • Brad nailer, 18 ga Kit Thin nails for trim, molding and cabinetry. Text
  • Pin nailer, 23 ga Kit Nearly invisible pins for delicate trim and veneer. Text
  • Wide-crown stapler, 16 ga Kit Staples lath, sheathing and house wrap. Text
  • Narrow-crown stapler, 18 ga Kit Staples cabinet backs, trim and underlayment. Text
  • Fencing stapler, 9 ga Specialty Drives fence staples to hang woven, barbed and welded wire. Text
  • Hammer tacker Kit Fast stapling of house wrap, roofing felt and insulation. Text
  • Staple gun Kit Staples fabric, insulation, screen and low-voltage wire. Text
  • 3-plane laser level (360°) Specialty Projects level and plumb lines all the way around a room. Text
  • Cross-line laser level Kit Projects level and plumb lines for cabinets, tile and fixtures. Text
  • Framing hammer Kit Heavy hammer for framing and demo. Text
  • Flat pry bar Kit Pries trim, molding and siding with minimal damage. Text
  • Trim puller Kit Pulls trim and baseboard without marring the wall. Text
  • Wood chisel set Kit Cleans out mortises, hinges and notches. Text
  • Nail set Kit Sinks finish nails below the surface. Text
  • Pull saw / flush-cut saw Kit Fine, flush cuts in trim and dowels. Text
  • Hand saw Kit Crosscuts and rips in lumber by hand. Text
  • Bar / trigger clamp Kit One-handed clamping for glue-ups and holding work. Text
  • Parallel-jaw bar clamp Kit Square, even pressure for cabinet and panel glue-ups. Text
  • Band clamp Kit Wraps around frames and odd shapes for glue-ups. Text
  • Corner clamp Kit Holds 90° corners for joining and fastening. Text
  • Pipe clamp Kit Long-reach clamping on black pipe. Text
  • Construction jack (panel & cabinet lift) Kit Holds cabinets, doors and panels in place while you fasten. Text
  • Compact jobsite blower Kit Blows dust and debris off decks, slabs and truck beds. Text
  • Wheelbarrow air compressor, 8 gal Specialty Runs framing and roofing nailers on the move. Text
  • Portable air compressor, 1-6 gal Kit Runs trim nailers and inflates tires. Text
Drywall, Painting & Finishing26 tools
  • Mixing drill (thinset, mud, paint) Kit Mixes thinset, grout, mortar, drywall mud and paint. Text
  • Drywall screw gun Kit Sets drywall screws to the same depth every time. Text
  • Oscillating multi-tool Kit Plunge cuts, flush trims and scraping where nothing else fits. Text
  • Drywall cut-out tool Kit Cuts openings in drywall for boxes, lights and vents. Text
  • Drywall sander, 9 in. (long reach) Specialty Sands drywall walls and ceilings; hooks up to a dust extractor. Text
  • Palm sander, 1/4 sheet Kit Fine finish sanding on trim, cabinets and furniture. Text
  • Random-orbit sander, 5-6 in. Kit Smooth, swirl-free sanding on wood, paint and body filler. Text
  • Heat gun Kit Softens paint and adhesive, shrinks tubing and thaws frozen lines. Text
  • Powered caulk & adhesive gun Kit Steady beads of caulk, sealant and construction adhesive. Text
  • Concrete nailer Specialty Fastens track, furring and plates to concrete and steel. Text
  • Powder-actuated fastening tool Specialty Shoots fasteners into concrete and steel for track and bottom plates. Text
  • 3-plane laser level (360°) Specialty Projects level and plumb lines all the way around a room. Text
  • Stud finder Kit Finds studs and joists behind drywall. Text
  • Jab saw Kit Hand-cuts openings in drywall. Text
  • Construction jack (panel & cabinet lift) Kit Holds cabinets, doors and panels in place while you fasten. Text
  • Automatic drywall taper Specialty Applies tape and mud to joints in one pass. Text
  • Drywall flat box Specialty Lays a smooth, even coat of mud over flat joints. Text
  • Drywall compound pump Specialty Fills tapers and boxes with mud straight from the bucket. Text
  • Drywall corner finisher Specialty Finishes inside corners in one pass. Text
  • Drywall inside-corner roller Kit Seats tape and wipes mud in inside corners. Text
  • Drywall mud applicator tube Specialty Loads mud into corners and joints without a hawk and knife. Text
  • Drywall knives & finishing trowel Kit Taping, skimming and finishing mud by hand. Text
  • Drywall / plaster hawk Kit Holds mud or plaster while you work. Text
  • Paint spray gun (air) Kit Sprays paint and primer from a compressor. Text
  • HEPA dust extractor Specialty Catches silica dust at the tool while you drill, grind or cut. Text
  • Door, panel & drywall dolly Kit Moves doors, sheet goods and drywall upright. Text
Plumbing35 tools
  • Rotary hammer, compact SDS-Plus (5/8 in.) Kit Light, one-handed anchor holes in concrete and block. Text
  • Rotary hammer, SDS-Plus (1 to 1-1/4 in.) Kit Anchor holes in concrete and block far faster than a hammer drill. Text
  • Diamond core drill (up to 6-3/8 in.) Specialty Clean round holes through block, brick and slab for pipe and conduit. Text
  • Stud & joist drill Specialty Bores big holes through studs and joists for pipe, conduit and cable. Text
  • Right-angle drill/driver Kit Drills and drives between studs and joists where a normal drill won't fit. Text
  • Compact band saw, 1-3/4 in. Kit One-handed cuts in threaded rod, conduit and strut. Text
  • Portable band saw, 3-3/8 to 5 in. Specialty Clean, quiet cuts in metal pipe, conduit and stock. Text
  • Metal chop saw, 14 in. Kit Fast, straight cuts in strut, angle, rod and pipe. Text
  • Compact reciprocating saw Kit Shorter, lighter recip saw for pipe, studs and nails in tight spots. Text
  • Reciprocating saw Kit Rough, fast demo cuts through framing, nails and pipe. Text
  • Threaded rod cutter Kit Cuts threaded rod clean so the nut still threads on. Text
  • Heat gun Kit Softens paint and adhesive, shrinks tubing and thaws frozen lines. Text
  • Powered caulk & adhesive gun Kit Steady beads of caulk, sealant and construction adhesive. Text
  • Pipe press tool, compact (1/2 to 1-1/4 in.) Specialty Presses copper fittings without a torch. Text
  • Pipe press tool (1/2 to 2 in.) Specialty Presses copper and stainless fittings. No torch, no solder, no fire watch. Text
  • Press jaw and ring sets Specialty Extra jaws and rings for copper, stainless and black iron sizes. Text
  • PEX expansion tool (up to 1-1/2 in.) Specialty Expansion PEX connections on larger lines. Text
  • PEX expansion tool (up to 1 in.) Specialty Expansion PEX connections with full flow through the fitting. Text
  • Copper swage tool Specialty Swages copper tube ends so they slip together for brazing. Text
  • Drain auger (snake) Kit Clears slow or stopped sinks, tubs and branch lines. Text
  • Sectional drain machine Specialty Cable sections that cut roots and heavy grease out of main lines. Text
  • Compact water jetter Specialty High-pressure water scours grease and sludge off the pipe wall. Text
  • Drain inspection camera Specialty See the blockage, break or belly before you quote the dig. Text
  • Pipe and cable locator Specialty Traces buried pipe and cable so you never dig blind. Text
  • Pipe threader Specialty Threads black iron and galvanized pipe on site. Text
  • Cast iron snap cutter Specialty Snaps cast iron clean, faster and with less dust than sawing. Text
  • Pipe deburring tool Kit Deburrs and cleans pipe ends before fitting. Text
  • Copper tubing cutter (powered) Kit Cuts copper tubing square in seconds. Text
  • PEX & plastic tubing cutter (powered) Kit Clean, square cuts in PEX and plastic pipe. Text
  • Liquid transfer pump Kit Moves water out of tanks, water heaters and low spots. Text
  • Plumb / spot laser Kit Transfers points from floor to ceiling for plumb layout. Text
  • Adjustable wrench, 6-12 in. Kit One wrench for many nut and fitting sizes. Text
  • Tongue-and-groove pliers Kit Grips pipe, fittings and odd shapes. Text
  • Submersible utility / sump pump Kit Pumps water out of basements, pits and pools. Text
  • Borescope / inspection camera Kit Looks inside a cylinder, wall or pipe without tearing anything apart. Text
Electrical31 tools
  • Rotary hammer, compact SDS-Plus (5/8 in.) Kit Light, one-handed anchor holes in concrete and block. Text
  • Rotary hammer, SDS-Plus (1 to 1-1/4 in.) Kit Anchor holes in concrete and block far faster than a hammer drill. Text
  • Diamond core drill (up to 6-3/8 in.) Specialty Clean round holes through block, brick and slab for pipe and conduit. Text
  • Stud & joist drill Specialty Bores big holes through studs and joists for pipe, conduit and cable. Text
  • Right-angle drill/driver Kit Drills and drives between studs and joists where a normal drill won't fit. Text
  • Power screwdriver Kit Light driving for cabinets, hardware, outlets and fixtures. Text
  • Impact wrench, 7/16 in. quick-change (utility) Kit Drives lag bolts, bits and sockets for utility and pole work. Text
  • Metal-cutting circular saw Specialty Cool, clean cuts in steel stud, strut, pipe and sheet. Text
  • Compact band saw, 1-3/4 in. Kit One-handed cuts in threaded rod, conduit and strut. Text
  • Portable band saw, 3-3/8 to 5 in. Specialty Clean, quiet cuts in metal pipe, conduit and stock. Text
  • Metal chop saw, 14 in. Kit Fast, straight cuts in strut, angle, rod and pipe. Text
  • Drywall cut-out tool Kit Cuts openings in drywall for boxes, lights and vents. Text
  • Threaded rod cutter Kit Cuts threaded rod clean so the nut still threads on. Text
  • Heat gun Kit Softens paint and adhesive, shrinks tubing and thaws frozen lines. Text
  • Concrete nailer Specialty Fastens track, furring and plates to concrete and steel. Text
  • Powder-actuated fastening tool Specialty Shoots fasteners into concrete and steel for track and bottom plates. Text
  • Cable stapler Kit Staples electrical cable to framing without pinching it. Text
  • Cable lug crimper Specialty Crimps large lugs and connectors onto heavy conductors. Text
  • Hydraulic knockout tool Specialty Punches clean holes in panels and enclosures for conduit fittings. Text
  • Wire-mesh cable tray cutter Specialty Cuts wire-mesh cable tray flush and clean. Text
  • Heavy cable cutter Specialty Cuts large copper and aluminum cable. Text
  • Cable stripper (powered) Kit Strips insulation off large conductors. Text
  • Electric conduit bender Specialty Repeatable, accurate bends in EMT and rigid conduit. Text
  • Cable puller Specialty Steady pulling force for heavy feeder cable through long conduit runs. Text
  • Fish tape and rod set Kit Pushes and pulls wire through conduit, walls and ceilings. Text
  • Pipe and cable locator Specialty Traces buried pipe and cable so you never dig blind. Text
  • 3-plane laser level (360°) Specialty Projects level and plumb lines all the way around a room. Text
  • Plumb / spot laser Kit Transfers points from floor to ceiling for plumb layout. Text
  • Pliers set Kit Linesman, diagonal, long-nose and slip-joint pliers. Text
  • Insulated screwdriver set Kit Screwdrivers insulated for electrical work. Text
  • Borescope / inspection camera Kit Looks inside a cylinder, wall or pipe without tearing anything apart. Text
HVAC & Sheet Metal15 tools
  • Stud & joist drill Specialty Bores big holes through studs and joists for pipe, conduit and cable. Text
  • Threaded rod cutter Kit Cuts threaded rod clean so the nut still threads on. Text
  • Metal shear, 14 ga (double-cut) Kit Cuts heavy sheet metal and ductwork without curling it. Text
  • Metal shear, 18-20 ga Kit Clean cuts in sheet metal and light-gauge steel, with no sparks. Text
  • Rivet tool, 3/16 in. Kit Sets blind rivets in sheet metal, gutters and trailers. Text
  • Pipe press tool, compact (1/2 to 1-1/4 in.) Specialty Presses copper fittings without a torch. Text
  • Pipe press tool (1/2 to 2 in.) Specialty Presses copper and stainless fittings. No torch, no solder, no fire watch. Text
  • Copper swage tool Specialty Swages copper tube ends so they slip together for brazing. Text
  • Vacuum pump (HVAC & refrigeration) Specialty Pulls moisture and air out of a system before charging. Text
  • Refrigerant recovery machine Specialty Recovers refrigerant into a tank so you can legally open the system. Text
  • Manifold gauge set Kit Reads high and low side pressures to charge and diagnose. Text
  • Pipe deburring tool Kit Deburrs and cleans pipe ends before fitting. Text
  • Copper tubing cutter (powered) Kit Cuts copper tubing square in seconds. Text
  • Aviation / tin snips Kit Cuts sheet metal, flashing and duct. Text
  • Borescope / inspection camera Kit Looks inside a cylinder, wall or pipe without tearing anything apart. Text
Metalworking & Welding29 tools
  • Magnetic drill press Specialty Locks onto steel and drills accurate holes in beams and plate. Text
  • Benchtop drill press Kit Straight, repeatable holes in wood and metal. Text
  • Impact wrench, 3/4 in. Specialty Truck lug nuts, structural bolts and big seized fasteners. Text
  • Air hammer / air chisel Kit Cuts exhaust, splits rusted nuts and chisels parts apart (runs on a compressor). Text
  • Metal-cutting circular saw Specialty Cool, clean cuts in steel stud, strut, pipe and sheet. Text
  • Compact band saw, 1-3/4 in. Kit One-handed cuts in threaded rod, conduit and strut. Text
  • Portable band saw, 3-3/8 to 5 in. Specialty Clean, quiet cuts in metal pipe, conduit and stock. Text
  • Portable bandsaw stand Kit Turns a portable band saw into a stand for repeat square cuts. Text
  • Metal chop saw, 14 in. Kit Fast, straight cuts in strut, angle, rod and pipe. Text
  • Cut-off tool, 3-4 in. Kit Cuts bolts, sheet metal and tile in tight spots. Text
  • Metal shear, 14 ga (double-cut) Kit Cuts heavy sheet metal and ductwork without curling it. Text
  • Metal shear, 18-20 ga Kit Clean cuts in sheet metal and light-gauge steel, with no sparks. Text
  • Bench grinder, 6-8 in. Kit Sharpens, deburrs and shapes metal on the bench. Text
  • Die grinder Kit Detail grinding, porting and deburring in tight spots. Text
  • Large angle grinder, 7-9 in. Kit Heavy cutting and grinding in steel, concrete and masonry. Text
  • Angle grinder, 4-1/2 to 6 in. Kit Cuts metal, grinds welds and cleans up rust. Text
  • Band file (belt file) Kit Sands and shapes in narrow slots and tight corners. Text
  • Benchtop belt sander Kit Shapes and smooths wood and metal parts on the bench. Text
  • Disc sander, 5 in. Kit Sands and finishes metal and wood with sanding discs. Text
  • Rivet tool, 1/4 in. Specialty Sets large blind rivets in trailers, truck bodies and steel. Text
  • Rivet tool, 3/16 in. Kit Sets blind rivets in sheet metal, gutters and trailers. Text
  • Hand riveter Kit Sets small blind rivets by hand. Text
  • Welding chipping hammer Kit Knocks slag off welds. Text
  • Aviation / tin snips Kit Cuts sheet metal, flashing and duct. Text
  • Air compressor / generator / welder (3-in-1) Specialty Compressed air, power and welding from one gas unit. Text
  • Welder (stick / TIG) Specialty Stick and TIG welding on steel. Text
  • Portable air compressor, 15-30 gal Specialty Steady air for air tools, inflating and blow-off. Text
  • Sandblaster (portable) Specialty Strips rust and paint from metal parts. Text
  • Abrasive blast cabinet Specialty Blasts small parts clean inside a closed cabinet. Text
Automotive & Mobile Mechanic63 tools
  • Impact wrench, 3/4 in. Specialty Truck lug nuts, structural bolts and big seized fasteners. Text
  • Impact wrench, 1/2 in. high-torque Kit Breaks loose rusted lug nuts, suspension bolts and seized fasteners. Text
  • Impact wrench, 3/8 in. Kit Compact impact for engine-bay and under-dash fasteners. Text
  • Impact wrench, 1/2 in. mid-torque Kit Runs nuts and bolts on and off fast with impact sockets. Text
  • Power ratchet, 1/2 in. Kit Spins larger nuts and bolts on and off in tight spaces. Text
  • Power ratchet, 1/4 & 3/8 in. Kit Runs small fasteners in engine bays and under dashes. Text
  • Torque wrench, 1/2 in. drive Kit Tightens lug nuts and suspension bolts to spec. Text
  • Torque wrench, 3/8 in. drive Kit Tightens smaller engine and accessory bolts to spec. Text
  • Air hammer / air chisel Kit Cuts exhaust, splits rusted nuts and chisels parts apart (runs on a compressor). Text
  • Cut-off tool, 3-4 in. Kit Cuts bolts, sheet metal and tile in tight spots. Text
  • Die grinder Kit Detail grinding, porting and deburring in tight spots. Text
  • Angle grinder, 4-1/2 to 6 in. Kit Cuts metal, grinds welds and cleans up rust. Text
  • Band file (belt file) Kit Sands and shapes in narrow slots and tight corners. Text
  • Disc sander, 5 in. Kit Sands and finishes metal and wood with sanding discs. Text
  • Random-orbit polisher, 5 in. Kit Polishes paint and removes swirl marks. Text
  • Rotary polisher, 7-9 in. Kit Buffs and compounds paint, gelcoat and metal. Text
  • Random-orbit sander, 5-6 in. Kit Smooth, swirl-free sanding on wood, paint and body filler. Text
  • Heat gun Kit Softens paint and adhesive, shrinks tubing and thaws frozen lines. Text
  • Rivet tool, 1/4 in. Specialty Sets large blind rivets in trailers, truck bodies and steel. Text
  • Rivet tool, 3/16 in. Kit Sets blind rivets in sheet metal, gutters and trailers. Text
  • Powered grease gun Kit Greases fittings on equipment, trucks and trailers. Text
  • Mechanics tool set Kit Sockets, ratchets and wrenches in one case. Text
  • Impact socket set Kit Impact-rated sockets for impact wrenches. Text
  • Hex & star bit socket set Kit Bit sockets for hex and star-drive fasteners. Text
  • Socket set Kit Standard and metric sockets with ratchets. Text
  • Ratcheting wrench set Kit Combination wrenches with ratcheting box ends. Text
  • Combination wrench set Kit Open- and box-end wrenches, standard and metric. Text
  • Floor jack, 3-ton Kit Lifts cars and light trucks for service. Text
  • Jack stands, 3-6 ton Kit Holds a lifted vehicle safely while you work. Text
  • Mechanic's creeper Kit Rolls you under the vehicle. Text
  • Portable jump starter Kit Starts a dead vehicle without another car. Text
  • Battery charger with engine start (40-100 A) Kit Charges a dead battery and cranks the engine. Text
  • Battery charger / maintainer (2-10 A) Kit Charges and maintains car, truck and equipment batteries. Text
  • Power inverter (vehicle) Kit Runs chargers and small electronics from a vehicle outlet. Text
  • Portable air compressor, 15-30 gal Specialty Steady air for air tools, inflating and blow-off. Text
  • Tire inflator Kit Inflates car, truck and equipment tires. Text
  • Paint spray gun (air) Kit Sprays paint and primer from a compressor. Text
  • Sandblaster (portable) Specialty Strips rust and paint from metal parts. Text
  • Abrasive blast cabinet Specialty Blasts small parts clean inside a closed cabinet. Text
  • Under-hood work light Kit Spans the engine bay with even light. Text
  • Handheld work light Kit Portable light for crawlspaces, cabinets and engine bays. Text
  • Bidirectional scan tool (tablet) Specialty Reads modules and commands parts: bleed ABS, retract an e-brake, run a relearn (coverage varies by vehicle). Text
  • EVAP / vacuum leak smoke machine Kit Fills the system with smoke so the leak shows itself. Text
  • Battery, starter & alternator tester Kit Tells you which of the three is actually bad before anything comes off. Text
  • Fuel pressure test kit Kit Gauge and fittings for checking fuel rail and pump pressure. Text
  • Compression tester Kit Finds the weak cylinder. Text
  • Cylinder leak-down tester Kit Shows whether a weak cylinder is rings, valves or head gasket. Text
  • Borescope / inspection camera Kit Looks inside a cylinder, wall or pipe without tearing anything apart. Text
  • Ball joint & U-joint press kit Kit Presses ball joints and U-joints out and in, on or off the vehicle. Text
  • Wheel bearing & hub puller kit Kit Removes and installs press-in front wheel bearings and hubs. Text
  • Coil spring / strut compressor Kit Holds a loaded spring so the strut comes apart safely. Text
  • Pitman arm & tie rod puller set Kit Separates tie rod ends, pitman arms and tapers without tearing boots. Text
  • Brake caliper wind-back kit Kit Winds back rear caliper pistons for new pads. Text
  • Brake line flaring tool Kit Makes double flares for brake line repairs. Text
  • Torque multiplier Kit Breaks loose and tightens big nuts with hand force. Text
  • Axle nut socket set Kit The large sockets axle and hub nuts need. Text
  • Harmonic balancer puller & installer Kit Pulls the balancer and presses the new one on square. Text
  • Engine timing / cam lock kit Kit Holds cams and crank in time while the belt or chain is off. Kits fit specific engines, so text us yours. Text
  • Valve spring compressor (on-engine) Kit Swaps valve springs and seals with the head still on. Text
  • Diesel injector puller set Kit Pulls seized diesel injectors with less risk of breaking them. Text us your engine. Text
  • Spark plug thread repair kit Kit Repairs a stripped spark plug hole in place. Text
  • Oil drain plug thread repair kit Kit Repairs a stripped oil pan drain plug hole. Text
  • A/C vacuum pump & manifold gauge kit Kit Pulls vacuum and charges automotive A/C. Text
Lawn, Tree & Landscaping34 tools
  • Plate compactor Specialty Compacts gravel and soil under pavers, slabs and walkways. Text
  • Rammer (jumping jack) compactor Specialty Compacts soil in trenches and tight spots a plate can't reach. Text
  • Fencing stapler, 9 ga Specialty Drives fence staples to hang woven, barbed and welded wire. Text
  • Fencing pliers Kit Cuts, pulls and splices fence wire and staples. Text
  • Hatchet / camp axe Kit Splits kindling and limbs, clears small brush. Text
  • Log splitting wedge Kit Splits rounds with a sledge. Text
  • Hand tamper Kit Compacts soil and gravel in small areas. Text
  • Top-handle chainsaw, 12-14 in. Specialty Light, compact saw for pruning and limbing. Text
  • Compact chainsaw, 8-12 in. Kit Light pruning and limbing. Text
  • Chainsaw, 16-20 in. Kit Cuts down trees and bucks logs and firewood. Text
  • Pole saw (chain) Kit Cuts high limbs from the ground. Text
  • Pole hedge trimmer Kit Trims tall hedges without a ladder. Text
  • Hedge trimmer Kit Shapes hedges and shrubs. Text
  • Pole pruner (powered lopper) Kit Snips high branches cleanly from the ground. Text
  • Powered pruner (lopper) Kit Cuts branches up to 1-1/2 in. Text
  • Brush cutter Specialty Clears thick weeds, brush and saplings. Text
  • String trimmer Kit Trims grass and weeds along fences and beds. Text
  • Lawn edger Kit Cuts crisp edges along walks and driveways. Text
  • Powered snow shovel, 10 in. Kit Clears snow from steps, decks and walks. Text
  • Snow blower, 21 in. Specialty Clears driveways and walks. Text
  • Backpack leaf blower Specialty High-volume blowing for big yards and job sites. Text
  • Leaf blower (handheld) Kit Clears leaves and grass clippings. Text
  • Commercial walk-behind mower, 48 in. Specialty Mows large lawns and commercial properties. Text
  • Lawn mower, 28 in. wide-cut Specialty Mows big yards in fewer passes. Text
  • Lawn mower, 21 in. Specialty Self-propelled mowing for average yards. Text
  • Log splitter, 20 ton Specialty Splits firewood rounds. Text
  • Log splitter, 28-32 ton Specialty Splits big rounds and knotty hardwood. Text
  • Backpack / pump sprayer Kit Sprays weed killer, sealer and cleaners. Text
  • Wheelbarrow / dump cart Kit Hauls soil, gravel, mulch and debris. Text
  • Shovel / spade Kit Digging, trenching and moving material. Text
  • Rake (bow / leaf / landscape) Kit Spreads gravel and soil, gathers leaves. Text
  • Post hole digger (manual) Kit Digs holes for fence and deck posts. Text
  • Garden fork Kit Breaks up soil and turns compost. Text
  • Turf edger (manual) Kit Cuts clean edges along beds and walks. Text
Generators, Compressors & Cleaning18 tools
  • Inverter generator, 2,200-2,500 W Specialty Quiet, clean power for electronics and small tools. Text
  • Portable generator, 6,500-8,000 W Specialty Runs saws, compressors and job-site loads. Text
  • Portable generator, 4,000-5,700 W Specialty Job-site and backup power for tools and lights. Text
  • Air compressor / generator / welder (3-in-1) Specialty Compressed air, power and welding from one gas unit. Text
  • Truck-mount air compressor (gas), 30 gal Specialty All-day air for nailers and air tools. Text
  • Wheelbarrow air compressor, 8 gal Specialty Runs framing and roofing nailers on the move. Text
  • Stationary air compressor, 60-120 gal Specialty Shop air for impact tools, blasting and painting. Text
  • Portable air compressor, 15-30 gal Specialty Steady air for air tools, inflating and blow-off. Text
  • Portable air compressor, 1-6 gal Kit Runs trim nailers and inflates tires. Text
  • Tire inflator Kit Inflates car, truck and equipment tires. Text
  • Portable pressure washer (up to 1,600 psi) Kit Light washing of vehicles, siding and patio furniture. Text
  • Pressure washer, gas 3,800-4,400 psi Specialty Heavy cleaning of concrete, equipment and buildings. Text
  • Pressure washer, gas 3,100-3,700 psi Specialty Cleans driveways, decks and siding. Text
  • Pressure washer, electric 1,500-3,000 psi Specialty Quiet cleaning of decks, patios and vehicles. Text
  • HEPA dust extractor Specialty Catches silica dust at the tool while you drill, grind or cut. Text
  • Portable vacuum (handheld to 2 gal) Kit Quick cleanup of dust and debris in tight spots. Text
  • Wet/dry shop vacuum, 10-16 gal Kit Big cleanups, water pickup and drywall dust. Text
  • Wet/dry shop vacuum, 4-9 gal Kit Everyday shop and job-site cleanup. Text
Layout & Measuring14 tools
  • Rotary laser level (with detector) Specialty Sets grade and level across a site or a large slab. Text
  • 3-plane laser level (360°) Specialty Projects level and plumb lines all the way around a room. Text
  • Plumb / spot laser Kit Transfers points from floor to ceiling for plumb layout. Text
  • Laser square Kit Projects square lines for tile and floor layout. Text
  • Cross-line laser level Kit Projects level and plumb lines for cabinets, tile and fixtures. Text
  • Laser distance measurer Kit Measures rooms and distances in seconds. Text
  • Builder's level (with tripod & rod) Kit Checks grade and elevation across a site. Text
  • Stud finder Kit Finds studs and joists behind drywall. Text
  • Long tape measure, 100-300 ft Kit Measures lots, footprints and long runs. Text
  • Tape measure, 16-35 ft Kit Everyday measuring on the job. Text
  • Torpedo level Kit Short level for pipe, conduit and tight spots. Text
  • Level, 24-78 in. Kit Checks level and plumb on walls, frames and forms. Text
  • Rafter (triangle) square Kit Marks square and angled cuts on rafters and lumber. Text
  • Chalk line reel Kit Snaps long, straight layout lines. Text
Drills, Drivers & Everyday Tools23 tools
  • Rotary hammer, SDS-Plus (1 to 1-1/4 in.) Kit Anchor holes in concrete and block far faster than a hammer drill. Text
  • Right-angle drill/driver Kit Drills and drives between studs and joists where a normal drill won't fit. Text
  • Hammer drill Kit Drills wood and metal, and adds hammering for brick, block and light concrete. Text
  • Impact driver Kit Drives long screws and lag bolts without stalling. Text
  • Power screwdriver Kit Light driving for cabinets, hardware, outlets and fixtures. Text
  • Drill/driver Kit Drills holes and drives screws in wood, plastic and metal. Text
  • Impact wrench, 1/2 in. high-torque Kit Breaks loose rusted lug nuts, suspension bolts and seized fasteners. Text
  • Impact wrench, 1/2 in. mid-torque Kit Runs nuts and bolts on and off fast with impact sockets. Text
  • Compact circular saw, 4-1/2 to 5-3/8 in. Kit One-handed cuts in plywood, paneling, trim and flooring. Text
  • Circular saw, 6-1/2 in. Kit Light, fast cuts in plywood, studs and sheet goods. Text
  • Circular saw, 7-1/4 in. Kit Full-size saw for framing, decking and sheet goods. Text
  • Jigsaw Kit Cuts curves, notches and openings in wood, laminate and sheet metal. Text
  • Compact reciprocating saw Kit Shorter, lighter recip saw for pipe, studs and nails in tight spots. Text
  • Reciprocating saw Kit Rough, fast demo cuts through framing, nails and pipe. Text
  • Oscillating multi-tool Kit Plunge cuts, flush trims and scraping where nothing else fits. Text
  • Angle grinder, 4-1/2 to 6 in. Kit Cuts metal, grinds welds and cleans up rust. Text
  • Compact jobsite blower Kit Blows dust and debris off decks, slabs and truck beds. Text
  • Portable vacuum (handheld to 2 gal) Kit Quick cleanup of dust and debris in tight spots. Text
  • Wet/dry shop vacuum, 10-16 gal Kit Big cleanups, water pickup and drywall dust. Text
  • Wet/dry shop vacuum, 4-9 gal Kit Everyday shop and job-site cleanup. Text
  • Tripod work light Kit Lights up a whole room or work area. Text
  • Handheld work light Kit Portable light for crawlspaces, cabinets and engine bays. Text
  • Jobsite fan (portable) Kit Moves air through hot rooms and drying areas. Text
Hand Tools & Tool Sets64 tools
  • Torque wrench, 1/2 in. drive Kit Tightens lug nuts and suspension bolts to spec. Text
  • Torque wrench, 3/8 in. drive Kit Tightens smaller engine and accessory bolts to spec. Text
  • Hammer tacker Kit Fast stapling of house wrap, roofing felt and insulation. Text
  • Staple gun Kit Staples fabric, insulation, screen and low-voltage wire. Text
  • Hand riveter Kit Sets small blind rivets by hand. Text
  • Tape measure, 16-35 ft Kit Everyday measuring on the job. Text
  • Torpedo level Kit Short level for pipe, conduit and tight spots. Text
  • Level, 24-78 in. Kit Checks level and plumb on walls, frames and forms. Text
  • Rafter (triangle) square Kit Marks square and angled cuts on rafters and lumber. Text
  • Chalk line reel Kit Snaps long, straight layout lines. Text
  • Mechanics tool set Kit Sockets, ratchets and wrenches in one case. Text
  • Impact socket set Kit Impact-rated sockets for impact wrenches. Text
  • Hex & star bit socket set Kit Bit sockets for hex and star-drive fasteners. Text
  • Socket set Kit Standard and metric sockets with ratchets. Text
  • Ratcheting wrench set Kit Combination wrenches with ratcheting box ends. Text
  • Combination wrench set Kit Open- and box-end wrenches, standard and metric. Text
  • Hand ratchet Kit Ratchet handles from 1/4 to 3/4 in. drive. Text
  • Adjustable wrench, 6-12 in. Kit One wrench for many nut and fitting sizes. Text
  • Tongue-and-groove pliers Kit Grips pipe, fittings and odd shapes. Text
  • Fencing pliers Kit Cuts, pulls and splices fence wire and staples. Text
  • Rebar tie pliers Kit Twists and cuts tie wire on rebar. Text
  • End nipper Kit Pulls and nips nails, staples and wire flush. Text
  • Pliers set Kit Linesman, diagonal, long-nose and slip-joint pliers. Text
  • Insulated screwdriver set Kit Screwdrivers insulated for electrical work. Text
  • Multi-bit screwdriver Kit One handle with interchangeable tips. Text
  • Screwdriver set Kit Screwdrivers in common tip styles and sizes. Text
  • Hex & star key set Kit L-keys for hex and star-drive fasteners. Text
  • Framing hammer Kit Heavy hammer for framing and demo. Text
  • Claw hammer Kit Everyday nailing and nail pulling. Text
  • Hand sledge (drilling hammer) Kit Drives chisels, stakes and pins. Text
  • Welding chipping hammer Kit Knocks slag off welds. Text
  • Brick hammer Kit Splits and trims brick and block. Text
  • Hatchet / camp axe Kit Splits kindling and limbs, clears small brush. Text
  • Wrecking bar Kit Pries apart framing, forms and demo debris. Text
  • Flat pry bar Kit Pries trim, molding and siding with minimal damage. Text
  • Nail puller / claw bar Kit Digs out and pulls embedded nails. Text
  • Log splitting wedge Kit Splits rounds with a sledge. Text
  • Trim puller Kit Pulls trim and baseboard without marring the wall. Text
  • Wood chisel set Kit Cleans out mortises, hinges and notches. Text
  • Nail set Kit Sinks finish nails below the surface. Text
  • Pull saw / flush-cut saw Kit Fine, flush cuts in trim and dowels. Text
  • Jab saw Kit Hand-cuts openings in drywall. Text
  • Hand saw Kit Crosscuts and rips in lumber by hand. Text
  • Aviation / tin snips Kit Cuts sheet metal, flashing and duct. Text
  • Utility knife Kit Scores drywall, cuts carpet, roofing and packaging. Text
  • Folding multi-tool Kit Pliers, blades and drivers in one pocket tool. Text
  • Bar / trigger clamp Kit One-handed clamping for glue-ups and holding work. Text
  • Parallel-jaw bar clamp Kit Square, even pressure for cabinet and panel glue-ups. Text
  • Band clamp Kit Wraps around frames and odd shapes for glue-ups. Text
  • Corner clamp Kit Holds 90° corners for joining and fastening. Text
  • Pipe clamp Kit Long-reach clamping on black pipe. Text
  • Drywall knives & finishing trowel Kit Taping, skimming and finishing mud by hand. Text
  • Drywall / plaster hawk Kit Holds mud or plaster while you work. Text
  • Concrete finishing trowel & float Kit Floats and finishes fresh concrete by hand. Text
  • Brick, pointing & margin trowels Kit Spreads and tools mortar for brick and block. Text
  • Concrete groover / edger Kit Cuts control joints and rounds slab edges. Text
  • Hand tamper Kit Compacts soil and gravel in small areas. Text
  • Shovel / spade Kit Digging, trenching and moving material. Text
  • Rake (bow / leaf / landscape) Kit Spreads gravel and soil, gathers leaves. Text
  • Post hole digger (manual) Kit Digs holes for fence and deck posts. Text
  • Garden fork Kit Breaks up soil and turns compost. Text
  • Mortar hoe Kit Mixes mortar and concrete in a tub or wheelbarrow. Text
  • Floor / ice scraper Kit Scrapes up tile, flooring, roofing and ice. Text
  • Turf edger (manual) Kit Cuts clean edges along beds and walks. Text
Jobsite Equipment11 tools
  • Radiant propane heater, 12,000 BTU Kit Spot heat for one or two workers. Text
  • Propane forced-air heater, 40,000-150,000 BTU Kit Heats open, ventilated job sites. Text
  • Kerosene forced-air heater, 50,000-215,000 BTU Specialty High-output heat for large, ventilated spaces. Text
  • Electric construction heater, 10-20 kW Specialty Flameless heat for enclosed jobs (240 V). Text
  • Step ladder, 4-12 ft Kit Interior work at ceiling height. Text
  • Extension ladder, 16-40 ft Kit Roof, gutter and exterior work. Text
  • Hand truck Kit Moves boxes, appliances and heavy loads. Text
  • Door, panel & drywall dolly Kit Moves doors, sheet goods and drywall upright. Text
  • Submersible utility / sump pump Kit Pumps water out of basements, pits and pools. Text
  • Drum fan (large) Kit Moves a lot of air to dry floors and walls and ventilate a job. Text
  • Electric heater, 1,500-3,300 W Kit Electric heat for small rooms and shops. Text

DON'T SEE YOUR TOOL? ASK US.

Don't see what you need? Just ask! If there is a specific tool you require for your job, request it and we will try to source and deliver it.

TEXT US

$19.99/day per specialty tool, or per 3-tool kit. Delivery fee based on location and rental length — not included in daily rate. Rates subject to change.

FAQ

What does $19.99 a day get me?

One specialty tool, or any 3 kit tools, for one day.

How much is delivery?

It depends on your location and how long you keep the tool. We quote it before anything moves. It is never included in the daily rate.

How long can I keep it?

As long as the job needs. Each day is $19.99. No minimum.

Where do you deliver?

New Jersey, New York, Pennsylvania and Connecticut. Text us your address.

Do you have a store?

No. We are delivery and pickup only.

How do I rent?

Call or text 917-722-8594 with the tool and your job site address. No account, no forms.